Push Type Pneumatic PU Equal Pipe Connector

What is a PU pipe connector?

Pneumatic push-in fittings, also called PU pipe connector, provide a leak-free means of easily connecting hoses in your compressed air system. These fittings, which are a type of pneumatic pipe connector, can have between 1-6 inlet/outlet ports or may have additional functionality such as an integrated pressure gauge or silencer.

How to Install Pneumatic Push-In Fittings

The hose is easy to install by pushing it into the release ring-end of the fitting until it stops. The internal lock claws will automatically clamp around the hose for an immediate and secure connection. This simple installation makes the push-in fitting a popular choice for a pneumatic pipe connector.

How to Uninstall Pneumatic Push-In Fittings

Push the release ring inward towards the fitting to disengage the lock claws. Similarly, pull back on the tubing to remove it. The opposite end may be another push to connect fitting, threaded male, threaded female or a threaded male with an inner hex-type connection. The threaded connections usually have a pre-applied thread lock coating. The tube must be fully inserted for a proper seal.

The Pros and Cons of Using Push-in Fittings

Pros

• Push-in fittings, as a type of pneumatic pipe connector, come with a quick release system which allows for simple and easy installation by hand, eliminating the need for tools and adhesive.

• Due to the ease of connecting and disconnecting air lines, it allows for frequent changing of air lines at a low cost.

• Push-in fittings are offered in a wide range of tube sizes, connections, and thread combinations to suit the desired outcome.

Cons

• Push-in fittings require firmer tubing with harder walls to resist being damaged by the internal claws. Firm tubing will be less flexible; therefore, it may not be suitable for systems where hoses will be routed around tight turns. If flexible tubing is desired, we recommend using hose tail barbed fittings instead of push-in fittings.

• Nylon, Polyethylene (PE), or Polyurethane (PU) tubing material is ideal for push-in fittings. It is also best suited for pneumatic (air) applications; however, it can be used for water applications.

Applications

Push-in fittings are used in all types of compressed air systems, but are most commonly used in applications having pneumatic cylinders, tools, and equipment. They can be used for water applications, but extra measures have to be taken (controlled surge pressure, water compatibility, insert ring, etc.) The push on connection method allows for rapid changing of components, so it is ideal if you have one air source for multiple tools that can be exchanged out.

Check out our range of PU connectors here

FAQs for Push Type Pneumatic PU Equal Pipe Connector:

Q1: How does a pneumatic pipe connector ensure a secure connection in PU tubing systems?
A pneumatic pipe connector uses an internal locking mechanism that grips the PU pipe firmly, ensuring a leak-free and secure connection for smooth airflow in pneumatic applications.

Q2: Is a pneumatic pipe connector easy to install without tools?
 Yes, a pneumatic pipe connector allows quick push-to-connect installation, enabling users to insert and secure PU pipes instantly without tools, saving time during assembly or maintenance.

Q3: Can a pneumatic pipe connector handle high air pressure in industrial systems?
A pneumatic pipe connector is designed to withstand typical industrial air pressures, providing reliable performance in compressors, cylinders, automation lines, and other pneumatic setups.

Q4: What maintenance is required for a pneumatic pipe connector to ensure long service life?
A pneumatic pipe connector requires simple maintenance, such as checking for dirt, ensuring proper pipe insertion, and inspecting seals to maintain optimal airflow and prevent leakage.